laguna Fusion 3 Скачать руководство пользователя страница 4

Страница: 4 / 81

Fusion 3 Table Saw \ Safety \

Safety

Read and understand all warnings and operation instructions before using any tool or equipment. Always follow basic

safety precautions to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or

equipment could result in serious injury and property damage. There are certain applications for which tools and equipment

are designed. This product should NOT be modified and/or used for any application other than for which it was designed.

It is important for you to read and understand this manual. The information it contains relates to protecting your safety and

preventing problems.

Safety Guidelines - Definitions

This manual contains information this is vital to protecting your safety and preventing equipment problems. To help you

recognize this information, we use the symbols below. Please read the manual and pay attention to these sections.

Safety Call-outs

An imminently hazardous situation which, if not avoided, will result in death or serious injury.

Sometimes displayed as

A potentially hazardous situation which, if not avoided, could result in death or serious injury.

Sometimes displayed as

A potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Sometimes displayed as

A helpful tip from our technical staff. Sometimes displayed as

NOTICE!

Safety Symbols

Disconnect from power before proceeding.

Wear ear protection.

Be aware of possible laceration danger.

Wear Eye Protection.

Be aware of possible crushing danger.

Wear a full face shield.

Be aware of possible crushing danger.

Wear lung protection.

Electrical Hazard.

Requires X People

Содержание Fusion 3


















































































Результаты поиска

Содержание Fusion 3

Отзывы:

Похожие инструкции для Fusion 3

Бренды по названию

Популярные бренды

laguna Fusion 3, Руководство пользователя

Результаты поиска

Содержание Fusion 3

Отзывы:

Похожие инструкции для Fusion 3

Бренды по названию

Популярные бренды