laguna DriftMaster, Руководство пользователя

Страница: 17 / 29

18
Double nuts or Nuts with special nuts
Fit the two nuts onto the stud (or nut with nut special) and tighten together. Fit
the studs to the two fixing holes in the shaft that you have selected. The holes
have tapered threads, and the studs will jam into the tapers. This is important,
as it will enable you to tighten the nuts at a later stage. Loosen the two nuts and
remove the outer one.
Shaft fitted
Fit the shaft to the side of the table and fit the nuts and washers to the studs on
the inside of the table.
Adjust the nuts so that the shaft is parallel to the edge of the table. It is not
important that the shaft is exactly parallel, as it is likely that the edge of the
table is not straight.