4
SAFETY RULES
READ CAREFULLY BEFORE OPERATING THE MACHINE
1.
Learn the machines applications and limitations, as well as the specific
potential hazards particular to this machine. Follow available safety
instructions and safety rules carefully.
2.
Keep working area clean and be sure adequate lighting is available.
3.
Do not wear loose clothing, gloves, bracelets, necklaces, or ornaments.
Wear face, eye, ear, respiratory and body protection devices, as indicated
for the operation or environment.
4.
Keep hands well away from saw bade and all moving parts. Do not clear
chips and sawdust away with hands. Use a brush.
5.
Make sure the blade is moving at operation speed before cutting. Do not
push the saw blade to hard. The saw will perform better and be safer
working at the rate for which it was designed.
6.
Whenever possible use a dust collector with shaving hood to minimize
health hazards.
7.
Never leave the machine with the power on.
8.
Keep children away. Make sure that visitors are kept at a safe distance
from the work area.
9.
Use recommended speed saw blade and accessories, and work piece
material.
10.
Never stand on tool. Serious injury could occur if the tool is tipped or if the
sanding tool is unintentionally contacted.
11.
Be sure saw blades are securely locked in the machine.
12.
Use suitable support if stock does not have a flat surface.
13.
Do not force the machine. It will do the job better and be safer at a rate for
which it was designed.
14.
Keep guards in place and in working order. If a guard must be removed for
maintenance or cleaning make sure it is properly attached before using the
tool again.
15.
Be sure that key and adjusting wrenches have been removed before
turning power on.
16.
Use only accessories designed for the machine.
17.
Make sure tool is properly grounded. If tool is equipped with three-pong
plug, if should be plugged into a three-prong electrical receptacle. Never
remove the third prong.
18.
Always disconnect tool before servicing and when changing accessories
sure as saw blades.
19.
Make sure that switch is in “OFF” position before plugging in cord.
20.
Hold material firmly against the table.
21.
Use ONLY recommended accessories. Use of accessories NOT
recommended by may result in a risk of injury.
22.
Do not use this Rip Saw for other than its intended use. If used for other
purposes, disclaims any real or implied warranty and holds itself harmless
for any injury, which may result from that use.
Содержание MRS5000-0280
Страница 7: ...7 Wiring Diagram ELECTRICAL CONTROL PANEL...
