background image

 

 

Dake Corporation 

 

 

1809 Industrial Park Dr 

 

Grand Haven, MI 49417 

www.dakecorp.com

 

 

974355-2 

  3 

REV032023 

 

 
 

 

 

Warranty Exceptions: 

The following conditions are not applicable to the standard limited warranty: 

(a)  Part installation or machine service was not completed by a certified professional, and is not 

in accordance with applicable local codes, ordinances and good trade practices. 

(b)  Defects or malfunctions resulting from improper installation or failure to operate or maintain 

the unit in accordance with the printed instructions provided. 

(c)  Defects or malfunctions resulting from abuse, accident, neglect or damage outside of prepaid 

freight terms. 

(d)  Normal maintenance service or preventative maintenance, and the parts used in connection 

with such service. 

(e)  Units and parts which have been altered or repaired, other than by the manufacturer or as 

specifically authorized by the manufacturer. 

(f)  Alterations made to the machine that were not previously approved by the manufacturer, or 

that are used for purposes other than the original design of the machine. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание DAKE Technics 350 SA


































Отзывы: