Dake Corporation
1809 Industrial Park Drive
Grand Haven, MI 49417
7
983113
REV112020
SAFETY WARNINGS
WARNING: FAILURE TO FAOLLOW THESE RULES
MAY RESULT IN SERIOUS PERSONAL INJURY
-
As will all machinery there are certain hazards involved with operation and use of the machine.
Using the machine with respect and caution will considerably lessen the possibility or personal
injury. However, if normal safety precautions are overlooked or ignored, personal injury to the
operator may result.
-
This machine was designed for certain applications only. We strongly recommend that this
machine NOT be modified and/or used for any application other than for which it was
designed. If you have any questions relative to its application DO NOT use the machine until
you contact with us and we have advised, you.
-
This machine is for metal cutting only. It is not approved for cutting wood. The supplier accepts
no responsibility for any machine when used for wood cutting.
Your machine might not come with a power socket or plug. Before using this machine, please
ask your local electrician to install the socket or plug on the power cable end.
NOISE
A: Average Noise Level = continuous level of airborne noise from machines when running at full
speed with no load.
C: Loudest Noise level = the peak noise level recorded from machines when running at full speed
with no load.
Based on above two measurements A & C. this saw's equivalent A-weighted sound pressure level at
the work station was measured at 70 dB, while its peak C-weighted instantaneous sound pressure
value at the work station was measured at 75 dB.
SAFETY RULES FOR ALL TOOLS
USER
•
Wear proper apparel: No loose clothing, gloves, rings, bracelets, or other jewelry to get caught
in moving parts. Non-slip footwear is recommended. Wear protective hair covering to contain
long hair.
