4. Turn all of the control knobs to the ‘OFF’ position before turning on the gas supply to
the appliance.
5. Operate the regulator in accordance with the instructions supplied with the
regulator.
LIGHTING YOUR BARBECUE
LIGHTING INSTRUCTIONS: MAIN BURNERS
1. Open the lid before lighting.
2. Connect the gas cylinder to the barbecue following the instructions supplied with the
regulator.
3. Turn all the control knobs to the ‘OFF’ position.
4. Turn ‘ON’ the gas supply at the cylinder or regulator switch following the regulator
connection and operating instructions. Check the cylinder to regulator connection and hose
to barbecue hose inlet connection for leakage using soapy water. Any leakage will show as
bubbles in the area of the leak.
5. If leak is found, do not use the barbecue. Consult your gas or barbecue supplier for advice.
6. To light the left hand burner, push down and turn the left burner control knob anti-clockwise
to the 90° position (full rate position). An audible click will be heard, this should light the
burner. Check that the burner is alight. If the burner has not lit, repeat this process.
7. If the burner has not lit after two attempts, turn ‘OFF’ the gas tap and wait 5 minutes before
retrying the ignition sequence.
8. When the burner has lit, the burner rate can be adjusted by push down and turn the knob
anticlockwise to any position between the full and low rate position.
9. Light the remaining burners from left to right in sequence.
10. To turn ‘OFF’ the barbecue, turn the cylinder valve handle or regulator switch to the ‘OFF’
position by following the regulator instructions. Once the burners have extinguished turn all
the control knobs to the ‘OFF’ position.
WARNING:
If any burner fails to ignite, turn the control knob off (clockwise) and also
turn the cylinder valve off. Wait five minutes before attempting to relight with ignition
sequence.
SIDE BURNER LIGHTING INSTRUCTIONS (IF APPLICABLE):
1. Once the grill burner has been lit, the side burner can be lit by following the instructions
below.
2. Open the side burner lid before lighting the side burner and turn the side burner control
knob to the ‘OFF’ position.
3. Push down the side burner control knob and keep pressing whilst turning anti-clockwise to
the full rate position, an audible click will be heard, this will light the burner. If the burner
does not light, repeat this process.
4. If the burner has not lit after two attempts, turn off the gas tap, wait 5 minutes and then
repeat step.3 in main burner lighting instructions.
5. When the burner has lit, the burner rate can be adjusted by push down and turn the knob
anticlockwise to any position between the full and low rate position.
6. To turn the barbecue ‘OFF’, turn the cylinder valve or regulator switch to the ‘OFF’ position
and then turn all of the control knobs on the appliance clockwise to the ‘ OFF’ position when
the flame have extinguished.
WARNING:
If the burner fails to ignite, turn the control knob off (clockwise) and also
turn the cylinder valve
9190225 / ER-1C-8804-2G BARBECUE AU GAZ 4 BRÛLEURS AVEC 1 BRÛLEUR LATÉRAL
9190225 / ER-1C-8804-2G 4 BURNER GAS BARBECUE WITH SIDE BURN