Lagler SINGLE, Руководство по эксплуатации

Страница: 20 / 68

SINGLE 01.06.2019
English / Englisch
COMMISSIONING
4.2 CONNECTING THE POWER CABLE
WARNING!
RISK OF DEATH from electrical shock:
• Never connect the machine on hazardous electrical
power sources such as electrical installations that are too
weak, not fuse protected or without electrical grounding!
Only use safety sockets!
• If the electrical installation is improper, there will be a
risk of death if the machine is connected directly to the
mains socket with the extension cable!
To protect yourself and the machine against faults in
the mains supply use a safety switch PRCD (for German
mains supply
part number in Section 11, Spare parts
SINGLE )!
• Observe the applicable regulations and legal requirements
in your country!
RISK OF FIRE from the overheating of the cables:
• Only the following motor cables and power cables may
be used:
- Machines with motor for mains voltage 220 V or 230 V:
Cables with three wires! Each wire must have a cross-
section of at least 2.5 mm² (0.0039 sq.in.)!
- Machines with motor for mains voltage 400 V:
Cables with five wires! Each wire must have a cross-
section of at least 1.5 mm² (0.0023 sq.in.)!
• The maximum cable length in order to connect the
machine to the mains supply must not exceed 20 m (790”)!
1 Push the socket onto the plug on the motor cable (fig. 10, 1)
and insert the extension cable in the upper cable holder on
the guide tube (fig. 10, 2).
2 Insert the plug of the extension cable into the coupler of the
safety switch PRCD or into the socket of a separate vacuum
cleaner ( Section 5.6, Attaching an external vacuum
cleaner ). Then insert the plug of the safety switch PRCD into
an adequately fused mains socket with protective contacts.
Fig. 10 Connect the motor cable to the extension cable (1).
Then insert the extension cable into the upper
cable holder on the guide tube of the SINGLE (2).
4
Sing Single
22
11
20