8. Put the ceramic fixed components into the ceramic
O-shaped hole, lock the small screws and fixing plugs
with the ceramic fixed components from the ceramic
side, then lock the large fastening screws with the
reserved holes on the ground from the ceramic side,
and finally the decorative cap is put on the back sleeve.
6.
Install the drain pipe fitting group according to the size
and height shown in the figure, and fix it with the wall
with bolts
9. The toilet is fixed and then drained.
7.
Firstly, punch two holes on the floor as shown
above, and then fix the plastic expansion pipe
to the floor.
The outlet pipe and power cord penetrate into
the toilet from the back of the toilet. The flushing
holes and drainage holes of the toilet are
aligned to the corresponding position, and
the toilet moves slowly to the arrow direction
and sticks to the wall.
Product installation
-10-
L
18
0
Level ground
Flush hole
Power line
Outlet hose
Drain pipe
Induction line
120
210~230
Ceramic Fixed Assembly
Stopper
Ceramic Fixed Hole
Decorative cap
Screw
Ceramic Fixed
Components