laerdal Pneumothorax Trainer, Инструкция по применению

Страница: 6 / 8

Caution: prevent the Inline Hose from falling
through the opening into the torso.
3. Remove bladder from pneumo pad and discard.
4. Trim bladder tubing to match original tubing length
to fit
this manikin style. Connect new bladder
hose to Inline Hose Connector.
Fig. 3
5. Insert new pneumo bladder into pneumo pad.
6. Replace chest skin over torso and re-attach.
7. Fill puncture marks on exterior of chest skin with
modeling wax (supplied in Pneumothorax Bladder
Replacement Kit).
NOTE: Bladders can be repaired using vulcanized or
contact cement glue (not provided). Cover punctured
surface of pneumo bladders with glue. Allow to air dry
completely.
Care and Maintenance:
1. Clean with mild soap and water; do not submerse
manikin or parts in cleaning fluids or water.
2. Use only on clean surface. Avoid felt tipped markers, ink
pens, acetone, iodine or other staining products and
avoid placing the manikin on newsprint or inked lines of
any kind.
3. To ensure longevity, manikin and module should be
cleaned after each training session and a general
inspection should be conducted regularly.
4. Articulating parts will benefit from a light application of
talcum powder prior to training sessions.
5. Store properly in dry and dust free environment
between teaching sessions.
260-05001 Laerdal 6