3
Troubleshooting
PROBLEM
SOLUTION
Car will not pair with
the remote
1. Our ONYX car has a thermal protection feature.
When the ESC detects that the temperature is too high, it
will automatically start thermal protection.
Thus, it needs to be switched off and wait for a few minutes
to cool the temperature down.
2. Keep the remote and the car a few feet away from each
other while pairing.
3. Keep the remote and the car away from large metal
objects while pairing so there is no interference.
Wheels are not
spinning properly
1.
Tighten the locknuts (Part Number ON-1021) that are
holding the wheels in place.
2.
Check for any missing pieces like hub hex with shafts
(Part Number ON-1022) and/or rear dog bone
(Part Number ON-2002).
3.
If all parts are intact, the differential may be broken and
needs to be replaced.
Stripping sound upon
accelerating
1. Inspect the car and make sure all the pieces are in place
and no foreign objects were caught up in it.
Please refer to the schematic in this User Manual to properly
check the parts.
2. Check the rear differential (Part number ON-2000) if it is
working properly.
Make sure the differential and/or rear dog bones are not
stripped or missing the pins.
