13
www.LAEGENDARY.com
Electronic
Speed Control
Features
ADJUSTING THE ELECTRONIC SPEED CONTROL
• Build in capacitor, waterproof and dust proof to adapt to all weather conditions.
• High quality with special circuitry to accept surge current.
• Auto throttle calibration, which makes it easy for the novice users.
• Use Jumper pin setting to select mode and functions.
• Low voltage cut off for LiPo battery, high temperature protection.
• IPX5 water-resistance rating
Connection diagram
Warning: The ESC is not protected against reverse polarity voltage.
Make sure the battery polarity is correctly plugged into the ESC or you will risk
damaging the component.
Battery
Motor
Receiver
on/off switch
Brush ESC
Forward: Continuous/Peak Current:
Reverse: Continuous/Peak Current:
Battery:
Motor in Turn (T). 1s LiPo:
(Only support LiPo if 1cell is used)
Motor in Turn (T). 2s LiPo or 6cells:
Internal resistance:
BEC output voltage:
Size/Weight:
60A/360A
30A/180A
2-3s LiPo, 5-9cells NiMH
540,550motor
≥
12T or below [email protected]
540,550motor
≥
18T or below [email protected]
CW:0.001
Ω
CCW:0.002
Ω
3A/6V (switching regulation)
34.5x30.2x20.5mm /42g
Specifications
