7.7 Compass Mode -
Magnetic Declination Mode
What is Magnetic Declination
- Check the “Magnetic Declination at Major Cities”
to get the magnetic declination of the city which is
close to your current position. That angle will be
inputted into the Watch during the calculation.
- In Compass Calibration display, press [M] to enter
Magnetic Declination Display.
- Press [S/S] or [L/R] button to increase / decrease
the number. ( Hold down the button changes the
number at a higher speed )
- Hold [M] to confirm and exit the adjustment
display
Compass Mode
Rotation Calibration
Stop Display
Hold [M]
[M]
Hold [M]
Declination Setting
Magnetic Declination
Display
[S/S] / [L/R]
Increase/Decrease
the number
Increase/Decrease the
number at a higher speed
Hold [S/S] / [L/R]
9.0 Chronograph Mode -
Start/Stop the Chronograph
Chronograph Mode
• The Watch includes a function elapsed times,
accumulative elapsed time and lap times -
Chronograph Mode.
• The display shows the ‘All Zeros’ display when the
chronograph is being selected the first time or the
chronograph has been reset.
How to Start/Stop the Chronograph
• When the chronograph is stopped (not counting).
press the [S/S] button once to start the chronograph;
press the [S/S] button once again to stop the
chronograph.
• The elapsed time between the two keystrokes will
appear on the display.
• Repeat the above mentioned steps to get the
accumulative elapsed time of which the chronograph
is running.
How to Reset the Chronograph
• To record a new set of elapsed time, hold down the
[L/R] button for 2 seconds to reset the chronograph to
‘All Zeros’ display when the chronograph was
stopped.
NOTE:
When the chronograph is reset, the record lap
time(s) will be deleted at the same time.
8.0 Daily Alarm Mode -
Daily Alarm 1, Daily Alarm 2 and Chime Display
Daily Alarm 1 and Daily Alarm 2
- The Watch includes two daily alarms: Daily
Alarm 1 and Daily Alarm 2. The Daily Alarm 1
and Daily Alarm 2 are working independently.
- Press the [S/S] button to switch among the Daily
Alarm 1, Daily Alarm 2 and Chime Display
following the adjacent diagram.
How to Turn ON/OFF the Daily Alarm
- To turn ON/OFF the Daily Alarm 1 (2), press the
[L/R] button in Daily Alarm 1 (2) Display.
- When the Daily Alarm 1 (2) is ON, the alarm
indicator ' ' will appear.
- If the alarm indicator is appeared, the Watch will
sound at the preset alarm time every day. When
the alarm sounds, press any button to stop
the beep.
How to Turn ON/OFF the Hourly Chime
- To turn ON/OFF the Hourly Chime, press the
[L/R] button in Chime Display.
- When the chime is ON, the Chime
indicator
' ' will appear. If the Chime
indicator is appeared, the Watch will beep once
at the hour every hour.
Daily Alarm Mode
Daily Alarm 1
Display
Alarm “ ON ”
Display
Daily Alarm 2
Display
Hourly Chime
Display
[S/S]
[L/R]
[L/R]
[S/S]
[S/S]
8.1 Daily Alarm Mode - Setting the Alarm
hold
[M]
hold
[M]
Daily Alarm 1 Display
Digits have been
selected (flashing)
Setting Display
Daily Alarm Time Setting Sequence
[M]
Minute
Hour
[S/S] / [L/R]
Increase/Decrease
the number
Increase/Decrease the
number at a higher speed
Hold [S/S] / [L/R]
How to Set the Alarm 1 and Alarm 2
- To select the setting display, hold the [M] button
for about 2 seconds in Alarm 1 (2) Display, then
the flashing “SET” icon will appear.
- In setting display, press the [M] button to change
the selection between minute and hour.
- When the digits are flashing (selected), press
the [S/S] or [L/R] button to increase /
decrease the number. (Hold down the button
change the number at a higher speed).
- When the set is completed, press and hold
the [M] button to exit the setting display.
