Lacunza Nickel 1000 DC, Инструкция

Страница: 8 / 28

INSTRUCTIONS FOR THE INSTALLER 7
2.
pressure and it is necessary to install a non-
closable outside-air inlet with a section of
at least 90 cm².
2.2.2. Location of the appliance in the
room
Choose a location in the room which
favours good hot-air distribution by
convection and radiation.
WARNING!: The appliance must be
placed on a raised support or bench that
allows the passage of air for combustion
under of it.
Figure No.4 - Combustion air intake
Figure No.5 - The appliance musti be
placed on a bench.
2.3. Installation of the appliance
2.3.1. Floor
Make sure that the base can withstand
the total constructed weight of the
appliance and its casing.
The apparatus should not be placed on
combustible material.
2.3.2. Safety distances
Be sure to respect the appliance
installation distances from combustible
materials . Looking at the appliance head-
on:
Distance to
combustible
materials
(mm)
From the right-hand side
100 mm of
isolation
From the left-hand side
100 mm of
isolation
From the rear 1500
From the front 1500
Bear in mind that it may even be
necessary to protect non-combustible
material in order to prevent breakage,
deformation, etc., as a result of
overheating
if the non-combustible
material is not designed to withstand high
temperatures.
2.3.3. Checks before lighting for the first
time
•
Make sure that the glasses are not
broken or damaged.
100 mm de
aislamiento
•
Make sure that the flueway is not
obstructed with packing or loose parts.
•
Check the deflectors are correctly
positioned.
•
Make sure that the airtight joints
on the flue circuit are in perfect
condition.