7.1 XG-30 Timer Mode -
Setting the User Preset Value
How to Set the User Preset Value
+
Starting from Current Time Mode, press the
[SEL] button 3 times to access the Timer
Mode.
+
To select setting display, hold the [SEL]
button for 2 seconds, and the flashing "
SET
"
icon will appear.
+
In setting display, press the [SEL] button to
change the selection among hour, minute and
second following the adjacent diagram.
+
When the digits are flashing (selected), press
the [S/S] or [L/R] b utto n to increase /
decrease the number. (Hold down the button
to change the number at a higher speed).
+
When the setting is completed, hold down the
[SEL] button to exit the setting display. The
XG-30 will also exit the setting display if NO
keystroke has been activated for 1 minute
Increase/ decrease
the number
Increase/decrease
the number at
a higher speed
hold [S/S] / hold [L/R]
[S/S] / [L/R]
User Preset Value Setting Sequence
XG-30 Timer Display
hold
[SEL]
Setting Display
minute
Second
hour
hold
[SEL]
[SEL]
[SEL]
[SEL]
digits
selected
(flashing)
7.2 XG-30 Timer Mode -
Using the Regatta Timer
How to Use the Timer
+
When a target time is set by using the
Quick
Set Value or User preset Value,
press the [S/S]
button to start the counting. When the timer is
counting, press the [S/S] button once again to
stop the counting.
+
Once the timer is started, the countdown time
will show on the display continuously, and the
XG-30 will alert the user by beeping as
follows:
+
The last 10 minutes: The XG-30 will beep
once for every minute.
+
The last one minute: The XG-30 will beep
for every 10 seconds.
+
The last 10 seconds: The XG-30 will beep
for every second(s).
+
A t z e r o : t h e X G - 3 0 w i l l s w i t c h t o
Chronograph Mode and start up-counting
automatically, and it will beep for 30
seconds.
How to Reload the Timer
+
To reload the timer with the current target
time for a new counting before the XG-30
counts to zero, press the [L/R] button once
when the timer was stopped.
+
To start a new counting from a new target
time, set the timer again.
XG-30 Timer Display
Counting Display
Stop Counting Display
digits start
counting
digits stop
counting
[S/S]
[L/R]
[S/S]
8.0 Dual Time Mode -
Dual Time and Setting the Dual Time
Dual Time Display
+
The XG-30 includes a Dual Time Mode which
shows the current time for a second time zone.
+
The second digits of the dual time is the same
as the current time.
+
When the Dual Time Display is selected, the
XG-30 will show the following items on the
display:
+
The dual time will appear on the middle row.
+
The elapse of second will be analogically
represented by the bar-indicator which is
around the display.
To Set the Dual Time
+
Starting from Current Time Mode, press the
[SEL] button 4 times to access the Dual Time
Mode.
+
To select setting display, hold down the [SEL]
button for 2 seconds in Dual Time Mode, and
then the flashing "
SET
" icon will appear.
+
In setting display, press the [SEL] button to
change the selection between hour and minute.
+
When the digits are flashing (selected), press
the [S/S] / [L/R] button to increase / decrease
the number. (Hold down the button change the
number at a higher speed).
+
When the setting is completed, hold down the
[SEL] button to exit the setting display. The
XG-30 will also exit the setting display if NO
keystroke has been activated for 1 minute
Increase/ decrease
the number
Increase/decrease
the number at
a higher speed
hold [S/S] / hold [L/R]
[S/S] / [L/R]
User Preset Value Setting Sequence
hold
[SEL]
Setting Display
hour
minute
hold
[SEL]
[SEL]
Dual Time Display
NOTE:
This diagram exhibits the
c o n n e c t i o n b e t w e e n d i f f e r e n t
d i s p l a y s o n l y, a n d h e n c e t h e
numbers showing on these display
do not conform to fact for some
instance.
XG-30 Timer Alarm Sounds
digits
selected
(flashing)
10
50
9
9
8
8
40
7
7
6
6
30
5
5
4
4
20
3
3
2
2
10
1
1
0
minute(s)
seconds
second(s)
Chronograph auto-start
start
start
start
7.0 XG-30 Timer Mode -
Countdown Timer and the Quick-Set-Values
XG-30 Timer Display
+
The XG-30 includes a Timer Mode which measures
the elapse of a fix period of time (target time).
+
The timer starts down-counting from the target time to
zero and then it starts up-counting.
+
The target time can be set by using Quick Set Value
or User preset Value following the adjacent diagram.
+
When the Timer Display is selected, the
XG-30
will show the following items on the display:
+
The Target time will appear on the middle row.
+
The current time will appear on the bottom row.
+
The elapse of second will be analogically
represented by the bar-indicator which is
around the display.
The Quick-Set-Value
+
The Quick-Set-Value is a set of values which is pre-
installed into the XG-30. These values can NOT be
changed by the user.
+
The XG-30 includes 6 Quick-Set Values, they are 1,
3, 5, 10, 15 and 45 minutes.
The User Preset Value
+
The User Preset Value is a value which can be set by
the user, and it can be set up to 99 hours 59 minutes
59 seconds.
+
Once the User Preset Value has been set, such as 30
minutes, it will store into the XG-30 for recall the
next time.
+
To set the User Preset Value, check the coming
chapter 7.1 for more details.
XG-30 Timer Display
1 min
3 min
45 min
5 min
10 min
15 min
Timer Setting Sequence
the indicator
flashing
the time which the
timer will countdown from
(hour, minute and second)
[L/R]
User
Preset
Value
Quick-Set-Value
[L/R]
[L/R]
[L/R]
[L/R]
[L/R]
[L/R]
Current Time
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep
Beep-Beep for 30 sec.
