CE ORIGINAL MANUAL
SCAMPER S600
VERSION CE 1.1 EN
11
General information about the E-Bike:
1. The E-Bike is mechanically the same as a normal bike. All moving parts, like cables, brakes, gear and axes can be
maintained by using silicon or telfonspray.
Check on a regular basis if all bolts and screws are secured. Important points are front and back wheel, luggage rack
and steering.
When closing the large hinge attachment (frame clamp), note that a certain rising back pressure is felt until the dead
point is over. If you are in doubt about the proper operation of the hinge clamp, contact us and do not use the bicycle.
Tip:
Spray chain and gear after a wet parcours, the chain needs the most lubrication.
You can clean the chain with a cleaning kit, available at any bike shop.
Tire size is 20 inch, available at any bike shop.
Caution with moist, store the bike in a dry environment. Sensitive parts are the display unit and the controller.
Rusting parts can be treated with telfonspray.
Keep the bike clean and dry to limit corrosion.
2. For gear adjustments you can contact our service line
or your local bike technician. Many information about
Shimano gears is available on the internet.
3. Keep the tires on tension. This improves driving
experience and range. We recommend a tire pressure
between 3.5-4.0 Bar.
4. Brakes may need to be adjusted after a while. This
can easily be done on the brake levers on the steering
wheel. For safety reasons, consult a bike technician for
gear and brakes adjustments on the wheel side.
