CE ORIGINAL MANUAL
LACROS SCAMPER S200(XL)/S400(XL)
VERSION CE 1.4 EN
13
6.
Safety rules
•
Read carefully the manual supplied with your bicycle before using it for the first time.
•
Strictly adhere to the traffic rules.
•
Never disassemble the bicycle yourself. If replacement of a part is necessary, contact your dealer or Shinga
B.V. for the relevant part.
•
Do not lend your bicycle to persons with little experience on an electric bicycle.
•
Do not ride under the influence of drugs or alcohol.
•
Never load the bicycle beyond its maximum capacity.
•
Do not modify anything on your bicycle yourself. As a result, the warranty and liability will expire.
•
The maximum speed of the vehicle is 25 Km/h.
•
If the front fork, steering column or handlebars are bent after an accident, they must under no circumstances
be bent back to its original position to avoid breakage. Contact your Shinga dealer or Shinga B.V. directly to
have the damaged parts replaced.
•
STEER-/ SADDLE PIN: See figure 1.
A rib line is engraved in the seat post and stem. This is the minimum length
that must remain in the frame (with the seat post) or in the steering column (at the stem).
•
STEER-/ SADDLE CLAMP: See figure 2.
By means of these clamps allow you to adjust the saddle and
handlebars to the correct height. Make sure these clamps are tight.
Figure 1: STEER-/ SADDLE PIN
Figure 2: STEER-/ SADDLE CLAMP
