Lacor PRO 61682, Инструкция по эксплуатации и техническому обслуживанию

Страница: 33 / 62

33
OPERATION
1.- Unpack the appliance before using it. Don't throw the packaging away until you've made sure
the blender works properly.
2.- Put the food you'd like to crush or beat in the blender cup (7) or the chopping accessory (9).
Be aware that the cup has a maximum capacity of 800 ml and the chopper has a maximum
capacity of 500 ml.
a.- To crush food: Put the motor body on the crushing blade and make the arrow on the
body line up with the unlocked position. Turn the arm counter-clockwise until the
arrow lines up with the locked position (PHOTO 1).
b.- To beat food: Put the motor body on the paddle (8) (not included) and make the
arrow on the body line up with the unlocked position. Turn the paddle
counter-clockwise until the arrow lines up with the locked position (PHOTO 2).
c.- To chop food: Use the chopping accessory for chopping food with the blender.
Put the body on the chopper and make the arrow on the body line up with the
unlocked position. Turn the body clockwise until the arrow lines up with the locked
position (PHOTO 3).
3.- Plug the device into a suitable outlet. Be aware of the technical characteristics of the
appliance
4.- Use the speed selector (1) to set the speed the blender will run at. The speed can be
varied between 13,050 and 15,950 RPM (PHOTO 4).
NOTE:
This function can only be used by starting the appliance with the power button.
5.- Hold the blender cup or chopping attachment with one hand and hold the blender firmly with
your other hand.
6.- Push the power button (2) to start the blender (PHOTO 5).
7.- Push the TURBO (3) button to make the blender run at maximum speed (PHOTO 6).
8.- Do not run the appliance for more than 30 seconds continuously. Take short pauses to
lengthen the useful life of the appliance. After every two complete work cycles, keep the
blender stopped for three minutes.
NOTE:
Do not put any utensils, like a spoon, in the cup when the blender is running.
9.- The crushing blade can be submerged up to the beginning of the blade adapter.
10.- Stop pushing the buttons so the blender stops.
11.- Unplug the blender.