Lacon L-EX1616G4M, Руководство пользователя

Страница: 6 / 8

6
Network Cables Installation
1. Crossover or straight-through cable: All the ports on the
switch support Auto-MDI/MDI-X functionality. Both
straight-through or crossover cables can be used to connect the
switch with PCs as well as other devices like switches, hubs or
router.
2. Category 3,4,5 or 5e UTP/STP cable: To make a valid
connection and obtain the optimal performance. Appropriate
cables corresponding to different transmitting/receiving speed is
required. To choose a suitable cable, please refer to the following
table.
Media Speed Wiring
10Mbps Category 3,4,5 UTP/STP
100Mbps Category 5 UTP/STP
10/100/1000Mbps
copper
1000Mbps Category 5,5e UTP/STP
1000Mbps Fiber
(Mini-GBIC
required) 1000Mbps The cable type differs from
the Mini-GBIC you choose.
Please refer to the instruction
came with your Mini-GBIC.
Port Operation
The auto-negotiation feature allows ports running at one of
the following operation modes:
Media Speed Duplex Mode
Full Duplex 10Mbps
Half Duplex
Full Duplex
100Mbps
Half Duplex
10/100/1000Mbps
(copper)
1000Mbps Full Duplex
1000Mbps(Fiber)
(Mini-GBIC required) 1000Mbps Full Duplex
Note: For the last port, when both the fiber and copper
interfaces are connected, the system adapts the fiber
interface and disables the relevant copper port
automatically.
Backbone Network Application
This switch is ideal for boosting the throughput of backbone. For
an application sample of network topology, please refer to the
following chart.