Lacon L-EL900, Быстрый старт

Страница: 15 / 18

Hardened Media Converter
15
Redundant DC Terminal Block Power Inputs
There are two pairs of power inputs can be used to power up this device.
You need to have two power inputs connected to run the media converter,
but the FAULT LED indicator will light up to remind that the power
redundant system functions abnormal in case either PWR1 or PWR2 is
dead. Media Converter, however, continues working normally even fault
LED indicator lights up.
Step 1: Connect the DC power cord to the plug-able terminal block on the
media converter, and then plug it into a standard DC outlet.
Step 2: Disconnect the power cord if you want to shut down the media
converter.