Thunderbolt Series User Manual
36
Important info: If you wish to remove LaCie RAID Monitor from your computer, please run the Uninstaller.
Dragging the program icon to the Trash will not completely remove the utility from your computer.
REPLACING A DISK (2BIG)
Important info: While all Thunderbolt Series users should contact LaCie Customer Support if disk failure is
suspected, this section pertains to the 2big only due to the type of enclosure.
In the event that an individual hard disk fails in the LaCie 2big Thunderbolt Series, please contact your LaCie
reseller or LaCie Customer Support. Failed hard drives within the 2big Thunderbolt Series enclosure should only
be replaced by a compatible LaCie disk with equal capacity.
Once you have received your replacement disk, follow the steps below for proper installation.
Caution: After continuous use of the LaCie 2big Thunderbolt Series, drives may be hot. Please use caution
when removing the disks.
TO REMOVE A DISK
Confirm that the 2big Thunderbolt Series enclosure is off.
1.
Please make certain that you are properly grounded to avoid electrostatic discharge.
2.
The drive tray may be locked. To unlock it, insert the round end of the included 2-in-1 tool into the slot on the
3.
drive lock. Turn the lock until the slot is vertical.
