LaCie Biggest Quadra
User Manual
page
Using the Biggest Quadra
5.2. LCD Display Messages
The status of the LaCie Biggest Quadra controller
and array can be viewed through the LCD Display. By
using the Menu button to scroll through the messages,
the following information is available:
RAID level and capacity
Disk model
Disk DMA mode and capacity
Firmware version
Serial number
Fan and temperature status
5.2.1. Initialization Messages
■
These LCD Display messages may appear during
the Initialization phase.
LCD Display
Message
Message Cleared When...
RAID INIT xx.x%
Total: xxxxGB
New RAID array being created.
Initialization completed successfully
Initialization failed
❖
❖
Create New RAID?
(No) (Yes)
Re-create a new RAID array.
If the disks have been installed and a
new RAID array has been created
❖
RAID INIT 100%
xxxxGB INIT OK!
Initialization completed successfully.
The Enter button is pressed
❖
RAID INIT Failed
Dx offline
Disk “x” failed during the initializa-
tion and cannot be accessed.
The Disk is replaced
❖
RAID INIT Failed
Dx Bad sectors
Too many bad sectors on Disk “x.”
Initialization cannot proceed.
The Disk is replaced
❖
