LaCie 8big Rack Thunderbolt 2 User Manual
19
SETTING UP
The LaCie 8big Rack Thunderbolt 2 is shipped with the following installation components:
Rack rail kit for a standard 19-inch rack
■
Inner rack rails (A1, A2)
■
Outer rack rails (B1, B2)
■
Screws and washers for the rack rails
■
Inner rack rail M4x4 screws (8)
■
Outer rack rail M5x10 screws (8)
■
Washers (8)
■
Cable management arm kit
■
Power supply cables (certain models are shipped with one power supply cable)
■
Thunderbolt cable (2m)
■
Hard drives (the amount of hard drives can vary by model)
■
LaCie 8big Rack Thunderbolt 2 enclosure
■
An additional plastic bag with screws has been provided to fasten hard drives to the hard drive drawers. If you
must secure hard drives to the hard drive trays, make certain to use the included screws.
The instructions below are also available on the Quick Start Guide included with the LaCie 8big.
