LaCie NAS OS 4 User Manual
43
PREPARE FOR THE RESCUE
The LaCie NAS Rescue will prompt you to enter:
The LaCie 5big NAS Pro's IP address or network name
1.
The LaCie 5big NAS Pro's MAC address (Your LaCie 5big NAS Pro has two MAC addresses, one for each LAN
2.
port. You may use either MAC address for the Rescue.)
To find the addresses:
Check the sticker located on the bottom of your LaCie 5big NAS Pro enclosure for the MAC address.
■
Launch Seagate Network Assistant to review MAC and IP address information.
■
Connect a VGA monitor to the NAS's VGA port.
■
While not obligatory, you can connect a compatible monitor to the LaCie 5big NAS Pro before following the
. Doing so will help you confirm that the LaCie 5big NAS Pro boots from the LaCie USB Key to enter
Rescue mode. You can also review the device's IP and MAC addresses once it has entered Rescue mode.
The VGA signal reverts to energy saving mode within a few minutes. If the monitor appears to be receiving a
signal but no image is present, try to connect a USB keyboard to one of the LaCie 5big NAS Pro's USB ports. Tap
on one of the keys to view the LaCie 5big NAS Pro VGA signal.