LaCie 2big DOCK, Руководство пользователя

Страница: 15 / 48

Opera on
LaCie 2big Dock powers on automatically when:
It is connected to a computer that supports Thunderbolt 3 or USB.
It is plugged into a live power outlet.
The LEDs blink blue while the disks spin up.
Power on
In most instances, the LaCie 2big Dock powers on automatically when connected to a computer and an
active power source. However, the Sleep/Wake button can be used to power on the device if the following
two conditions are met:
The device was powered off using a long press.
The device remains connected to the computer’s USB port and an active power source.
To power on the LaCie 2big Dock, push the Sleep/Wake button for one second.
Power off
Follow the steps below to turn the device off:
1. Make certain that the device’s volumes are not being accessed.
2. Eject the device’s volumes from your computer’s operating system.
3. Disconnect the device from your computer.
Power saving mode
Your LaCie 2big Dock can conserve energy by entering power-saving mode. The hard drives within the
enclosure spin down to reduce power consumption when the 2big Dock is in power-saving mode. Power-
saving mode can extend the life of the hard drives by sparing them from working during extended periods
Caution—Do not operate LaCie 2big Dock until the ambient temperature is within the specified
temperature range (see
System Overview ). If the hard drives have been recently installed, make
sure they have time to acclimatize to the ambient temperature before operating them.

15 LaCie 2big Dock 6/7/22