LaCie 130737 - 321 - 21.3" LCD Monitor Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 20

LaCie 130737 - 321 - 21.3

Manufacturer’s Recycling and Energy Information

LaCie Group SA is strongly committed to environmental protection and sees recycling as one of
the company’s top priorities in trying to minimize the burden placed on the environment. We are
engaged in developing environment-friendly products and always strive to comply with the latest
independent standards from agencies such as TCO (Swedish Trades Union).

For help in recycling your old LaCie monitor please contact one of the following organizations :
Sweden www.el-retur.se

<http://www.el-retur.se/>

Germany www.recyclingpartner.de <http://www.recyclingpartner.de/>
Holland www.mirec.nl <http://www.mirec.nl/>
Japan www.diarcs.com <http://www.diarcs.com/>

Energy Saving
This monitor features and advanced energy saving capability. When a VESA Display Power
Management Signalling (DPMS) Standard signal is sent to the monitor, the Energy Saving Mode
is activated. The monitor enters a single Energy Saving mode.

Mode

Power Consumption

LED Color

Normal Operation

Approx. 52W

Green

Energy Saving Mode

Less than 1W

Amber

Off Mode

Less than 0.1 W

Unit

«
...
18
19
20

Содержание 130737 - 321 - 21.3" LCD Monitor





















Отзывы:

Нет отзывов