15
5. Raise the assembled door up and insert the first roller of its door slider 29 onto the door rail 14. Carefully align
the first bottom door slider 36 over the edge of the front floor plate 17. Carefully slide the door over and align the
other top roller and bottom slider as was done earlier.
6. Once the door is installed, install a bolt 40 and nut 48 into the hole on each side of the door rail 14 to prevent
the door from sliding off its rail. Attach the rail end caps 45A and 45B to the rail 14.
7. After installing all the PC panels , continue tightening nuts by tools about 1/4 turn .be careful not to over tighten
Use and Maintenance
1. BEFORE EACH USE, inspect the general condition of the greenhouse. Check for loose screws, misalignment
or binding of moving parts, cracked or broken parts, and any other condition that may affect the safe operation of
the greenhouse. If a problem occurs with the greenhouse, have it corrected before further use.
DO NOT USE DAMAGED EQUIPMENT.
2. TO CLEAN: Wipe with a damp cloth, using a mild detergent.
Do not use cleaners that are combustible, corrosive, or not compatible with aluminium.
3. WHEN STORING: Keep the greenhouse in a box and in a clean, dry location.
