I (Plastic Ring) Jx3 (Juice Bag) K (Stainless Steel
Screw)
L (Centre Rod) M (Centre Rod)
Assembly
：
1.
Part D and Part E, before being assembled, all metal hoops with bevel edge should
be set in one direction whilst the smooth edge must be in-line on the opposite side. Part
E should be attached to the inner side of the metal hoops.
When assembly is finished, all pressing cage blocks should be placed upon a flat surface to
make sure all blocks are kept in line
a d with the sa e height, to ake sure it’s s ooth a d
steady when placed in the round base.
2.
Part C and Part G assembly
