4 |
LACEnano LABRYS user manual
ENG
3 | Common problems
Machine won’t start
Machine stops mid work
(voltage is set around 8V)
Machine stops mid work
(low speed)
Machine is not running
consistently (high speed)
Machine is not running
consistently (low speed)
not connected properly
voltage in not between 4V–8V
Over voltage protection; lower the
voltage.
Depending on your machine
settings you either need to change
machine settings or raise the
voltage.
Lower the voltage.
Raise the voltage
Do not store or leave the power supply exposed to direct sunlight for
long periods of time. Do not drop or dissasemble the power supply
to avoid damaging your power supply and voiding the warranty.
To clean the exterior surfaces, preform the following steps:
4 | General Care and Cleaning
1
2
Disconnect all connections from the power supply.
Clean with moist soft cloth with a mild detergent, alcohol
or water.
To avoid damage to the power supply, do not expose it to caustic
liquids.
To avoid injury resulting from short circuit, make sure the power
supply is completely dry before reconnecting to power source.
CAUTION
