LACAVA
4
Installation Instructions/Instrucciones de Instalación
1. Place the cartridge bodies up through their designated
holes. Then slide a handle onto each extension and
thread onto the brass body.
2. Tighten each locking nut from under the mounting surface.
(DO NOT OVERTIGHTEN: avoid damage to mounting
surface)
3. Remove the mounting hardware from the spout assembly.
4. Place the spout into the hole in the mounting surface and
tighten the mounting nut from under the mounting surface.
Unscrew the pop-up knob from the vertical pop-up control
rod and then slide the rod through the slot on the back
of the mixer body. Then screw the pop-up knob back into
place.
