Installation Instructions/Instrucciones de Instalación
Toilet Installation
1. Place waste adapter over waste hole in the floor
(flange should be installed in hole) and mark where holes
will be drilled on the floor (X’s).
2. Remove adapter and drill holes.
3. Next install wax ring (not included) between waste
hole flange and circular part of waste drain adapter.
4. Secure waste drain adapter to floor with 4 screws.
5. Use 2 bolts to fasten circular portion of waste drain
adapter to waste hole flange.
5. Now fit toilet onto waste
drain adapter and trace
around the base of the toilet on
the floor.
6. Mark location of toilet
mounting holes.
7. Remove toilet. Fasten
mounting blocks to the floor at
your marks. (Note: account for
thickness of toilet wall)
LACAVA LLC
4
8. Now with waste drain adapter and mounting brackets fastened to floor place toilet
into waste drain hole and over brackets.
9. Place the included plastic washer inserts into the mounting holes in the toilet. Then use
included screws and screw into each mounting bracket.
10. Finally, install decorative screw caps over screws.
MOUNTNG BRACKETS
