Lacanche Fourneau Cormatin, Руководство по установке

Страница: 14 / 40

INSTALLER’S MANUAL
CORMATIN
Page 14 of 40 – US –
BACK SPACER VENT FITTING:
It is mandatory to mount the back spacer vent R to the wall supplied with the appliance.
Screw the 2 brackets S to the wall according to figure, 30 (screws not supplied), then fit the back spacer vent onto these
brackets by using the washers and nuts supplied with the range.
STABILITY DEVICE INSTALLATION INSTRUCTIONS:
Screw the anti-tip bracket T to the wall according to figures 30, 31 and 32 (screws not supplied).
Remove the left-hand drawer, push the range against the wall until the anti-tip bracket screw goes through the back of
the range. Through the drawer gap, screw the nut and its washer on the anti-tip bracket screw.
Figure 30
S
R
Fig. 28