Labrie Automizer Versa Hand Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 80

Labrie Automizer Versa Hand Скачать руководство пользователя страница 47

Controls and Indicators

41

Figure 3-6 J

OYSTICK

S

ELECTOR

switch

Move this switch to the right to activate the right-hand side arm control joystick.

Move this switch to the left to deactivate the right-hand side arm control joystick.

Crusher Panel Control Switch (optional)

The control switch for the crusher panel is fully manual (standard unit) and is located on the cab
console (see Figure 3-7).

Figure 3-7 C

RUSHER PANEL

control switch

I

MPORTANT

:

The packer must be fully retracted to allow the crusher panel to move down. The crusher panel
needs to be in the parked position to let the arm dump a cart.

To raise the crusher panel, turn the switch to the left.

To lower the crusher panel, turn the switch to the right.

The crusher panel is an option that may be installed on the vehicle. If it is installed, we suggest you to
use it only for bulky items and load-breaking purposes. In many cases, unnecessary use of the crusher
panel will slow down the operation. Bulky items can be maintained in place with the crusher panel
while the packer crushes them.

«
...
45
46
47
48
49
...
»

Содержание Automizer Versa Hand

















































































Отзывы:

Нет отзывов