Labounty MDG 140, Безопасность, эксплуатация и обслуживание

Страница: 5 / 28

MDG Operating & Maintenance Manual | 5
• Use of this tool on certain materials could generate
dust potentially containing a variety of hazardous
substances, such as, asbestos, silica or lead.
Inhalation of dust containing these, or other
hazardous substances could result in serious injury,
cancer or death. Protect yourself and those around
you. Research and understand the materials you are
processing. Follow safety procedures and comply
with all applicable national, state or provisional health
and safety regulations relating to them. If appropriate,
arrange for the safe disposal of the materials by a
qualified person.
• NEVER modify or mount the attachment to a carrier
other than the one it was originally designed for.
Rotation component failure may result, causing the
attachment to fall to the ground.
‘
• Remove all hydraulic and electrical power from
the excavator before installing or maintaining the
attachment.
• ALWAYS lower the boom to the ground before leaving
the cab. If it is necessary to work on an attachment
off the ground, securely support the machine and
attachment. DO NOT support the machine on cinder
blocks, hollow tiles, or props that may crumble under
continuous load. DO NOT rely on a cylinder to hold the
attachment in the air. DO NOT work under a machine
that is supported only by a jack.
• DO NOT let hot hydraulic oil come in contact with the
skin, as it could cause severe burns. Wear adequate
protective clothing and safety equipment. DO NOT
tamper with any hydraulic line or component while
it is pressurized. Escaping fluid under pressure can
penetrate the skin, causing serious injury. Relieve
pressure before unhooking hydraulic or other lines.
Tighten all connections before applying pressure.
Keep hands and body away from pinholes and nozzles
which eject fluid under high pressure. Use a piece of
cardboard to search for leaks. If ANY fluid is injected
into the skin, seek immediate medical assistance.
• Use protective clothing and safety devices
appropriate for the working conditions at all
times when viewing, operating or maintaining the
attachment. These may include, but are not limited to,
close-fitting clothing, eye protection, hard hat, steel
toe shoes, gloves, hearing protection and respirator
protection
• Keep clear of all potential pinch points, including the
moving grapple halves, cylinder connections, bucket
linkages and other moving parts.
• DO NOT weld on any structural member unless
specifically authorized by LaBounty. Any unauthorized
welding or welding procedures will void the warranty,
and may cause structural failure or result in personal
injury.
• Check ground conditions. Avoid unstable or slippery
areas. Position the excavator on firm, level ground. If
level ground is not possible, position the excavator
to use the attachment from the front or back. Avoid
working over the side of the excavator.
• Never leave equipment unattended with the engine
running or with the attachment in a raised position.
• Do not operate poorly maintained or otherwise faulty
equipment. Inform the proper authority and DO NOT
operate until fixed.