LABORIE Solar Blue, Руководство по обслуживанию и установке

Страница: 76 / 198

© 2008
– 2020 by MMS B.V.
75
5. Remote Control
5.1 Introduction
The RC-1200 remote control can be used to perform investigations with the
Solar Blue measurement system. The RC-1200 transmits infrared signals
(invisible), so no cable is required. The Solar Blue module is standard
equipped with an infrared receiver (see chapter 4 for more detailed
information). To operate properly, point the remote control in the direction of
the infrared receiver while pressing a key. Before working with the remote
control, make sure that you remove the plastic insulator.
RC-1200 keys
The RC-1200 contains 26 keys. The functions of the various keys are
explained in th
e Solar Blue User’s Manual (document code 0075-MAN-093-
EN)
NOTE The RC-1000 can also be used but is not described in this
manual. The information about the keys of the RC-1000 can
be found in the previous version of this manual.
NOTE
Some keys are not applicable for the Solar Blue software
program.
Figure 5.1 RC-1200