LABORIE Solar Blue, Руководство по обслуживанию и установке

Страница: 20 / 198

© 2008
– 2020 by MMS B.V.
19
2. Solar Blue Measurement System Setup
2.1 Introduction
The Solar Blue measurement system has been designed to carry out routine
urodynamic investigations quickly, easily and conveniently.
With the wireless set up, the Solar Blue module can be mounted on the Solar
pole (Ø38mm) (wireless pole setup) or put on a table (wireless table-top
setup). For both situations, the laptop/PC and printer can be put on a table.
The Solar Blue module communicates per wireless Bluetooth connection with
the computer (laptop or PC with BT dongle).
The Solar Blue module is powered by a standard delivered power supply. No
safety module is needed if the printer and computer are positioned outside the
patient vicinity. Take note of the system setup safety regulations (f.e. IEC
60601-1).
In this chapter, you will find an overview of the four Solar Blue measurement
system setups and some installation instructions:

Solar Blue table-top

Solar Blue investigation chair

Solar Blue on Solar pole (Ø38mm)

Solar Blue on Solar pole (Ø38mm) with integrated laptop
The assembly instructions for the Solar Blue module on the Solar pole
(Ø38mm) can be found in a separate document (Document Code: 0075-MAN-
099). Use this instruction also when the Solar Blue on Solar pole (Ø38mm)
setup is used (wireless pole setup).