LABORIE Solar Blue, Руководство по обслуживанию и установке

Страница: 14 / 198

© 2008
– 2020 by MMS B.V.
13
1.9 LABORIE Software Program
The LABORIE software program is provided on USB or DVD and should be
installed on the computer to make the complete system function. For an
overview of the software messages which require an action to resolve, see
Appendix F.
The program contains four parts:

Database program. When you start the program, you will enter the
database in which all available patient information, investigations, reports
and memos are stored. Selection of a patient will give easy access to all
information for that patient.

Measurement program. This program is started from the database. The
software guides the user through the investigation procedure and saves the
measured data under the relevant patient name.

Analysis program. This program is started from the database. Graphs and
parameters can be displayed and printed as investigation reports.

Hardware test (diagnostic) program. This program is started from the
database to maintain the Solar Blue measurement system.