LABORIE NXT Go Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 122

LABORIE NXT Go Скачать руководство пользователя страница 64

Synergy Software

NXT Go Owner’s Manual, LBL-00145, MAN2030

63

4.5.1.2

Consumable Traceability

During the

Preview

phase, the user will need to enter each of the consumables applicable

for the study under the

Consumable Traceability

window.



The user can do this by either scanning the SmartSense tag on the product using
the registration systems embedded in the NXT Go Pump Hub and the PIM NXT for
TDOC, or by manually entering the required information. Any information entered
for the consumables will be displayed in the

Consumable Traceability

window



During scanning of the consumable, the Roam NXT (connected to the PIM NXT) or
the NXT Go Pump Hub will provide auditory feedback emitting a single beep to
indicate scan in process, with an additional single beep for a successful scan or an
additional 2 beeps for a failed scan.

IMPORTANT:

Auditory feedback is not intended to act as a standalone indicator or as

an alert for consumable scanning status. Operators must verify that consumables have
successfully scanned into consumable traceability by verifying their addition in the

Consumable Traceability

window.

Figure 51: Consumable Traceability –Air-Charged and Fluid Catheters

Consumables are classified as automatic and manual. Follow the instructions provided below
for scanning different types of consumables:

Automatic consumables (e.g. the Pves Catheter, Pabd Catheter, or Vinf Catheter
enabled with a PIM connector) are automatically recorded when the catheters are
inserted into the PIM NXT. Verify that the catheter appears in the

Consumable

Traceability

window.

IMPORTANT:

Automatic consumables cannot be manually entered into Consumable

Traceability; they must be scanned by the PIM NXT.

Manual consumables (e.g. Pump Tubing, Extension Tubing, Pressure Measurement
Tubing, Fluid NXT Catheters, or other supplies required for the study) must be
either scanned using the registration system embedded in the NXT Go Pump Hub,
or the required information must be manually entered in the

Consumable

Traceability

window.

Status DRAFT Effective

«
...
62
63
64
65
66
...
»

Содержание NXT Go



























































































































Отзывы:

Нет отзывов