Laboratory2, LTD
j) Setting the current time and date
. To use the current system time, put a tick to "System
time". To manually change date and time in file system of a voice recorder, remove tick on
"System time" and put a tick "To adjust real time clock".
k) Switching on/off work on timers.
To activate recording at certain moments and for cer-
tain time period, it is necessary to establish a tick to
"Work on alarm clocks"
. Operation is
possible either in the mode of "A cyclic alarm clock" or by individually adjusted alarm
clocks. In the mode of "A cyclic alarm clock" the voice recorder makes records daily in the
adjusted time interval. During the work by individual alarm clocks it is necessary to set quan-
tity of alarm clocks in the “Quantity of alarm clocks” window, depending on the necessary
number of record activations. For initialization of each alarm clock set date (day of month)
and activation time, as well as record duration after which voice recorder will switch off and
expect activation of the following alarm clock. Alarm clocks work in strict sequence from the
first to the tenth. The voice recorder will be switched off automatically after the last alarm
clock activation.
l) Writing down the configuration file.
After adjustment of the required configuration press
the “Save configuration file” button. The program will create new or will rewrite already
available file of the
dict.ini
settings to the specified directory. Copy the created
dict.ini
file to
the microSD card and switch voice recorder on.
m) Reading the configuration file.
If it is necessary to read contents of earlier created set-
tings file, then press the “Read configuration file” button and choose a directory for reading
of the
dict.ini
file.
n)
Switching on/off cyclic recording.
This feature could be activated if it is needed to con-
tinue recording when the memory card is full. Information will be recorded over the oldest
one on the memory card.
Page12
Version of 14.05.2018