8
9
Electrical Connections
Controls
Connect the power cable to the AC inlet socket
(2) provided on the back of the illumination box as
shown as(1) in the fig 7.
Switch on the power from on/off switch provided
in the front of illumination box.
Note: Power supply is designed with universal
input 100V-240V AC, 50/60Hz. To plug in follow
instruction on electrical label provided at
bottom of the arm as shown (3)here in Fig. 7.
9.1 ON/OFF switch
It is located in the front of the illumination box as
shown as (A) in fig. 8a. At ‘ON’ position, green
LED glows and cooling fan starts running. Keep
the intensity control knob at minimum level before
switching on the system.
It is located in front of the suspension arm shown
as (A) in Fig. 8. Brightness of field of view can be
adjusted as per user comfort using intensity
control knob.
To save burning life of LED, switch OFF the
appliance if the microscope is not in use for
longer time.
9.2 Intensity control knob
9.4 Camera & Potentiometer output in center,
shown as D in fig. 8
9.5 Camera output shown as E in fig. 8
9.6 Camera potentiometer inlet, shown as G
in fig. 8a.
9.7 Yellow filter to swing in and swing out as
shown as F in fig. 8a
9.3 Swivel arm locking knob
This knob helps you to lock the movement of
swivel arm at the desired position after initial
focusing of the attendance area by turning it
clockwise, knob is shown as (B) in Fig. 8 .
Prima DNT Trainer
Fig. 7
Fig. 8
12
1
A
B
3
F
Fig. 8a
A
D
E
G
Issue 1.0
6167500-795
PRIMA DNT Trainer
Printed on May 2013
