1.
of personal injury or damage to this Instrument. It is recomended for
your safety to read the manual throughly & do not discard this
manual rather preserve it for easy reference while operating for best
results.
2
To avoid potential electrical hazards when replacing halogen bulb,
turn the microscopes main switch to the OFF position and
disconnect power cord from wall outlet in advance. Whenever you
replace your microscope bulb, allow lamp socket and bulb to cool
before touching (Fig. 1)
Applicable bulb replacement: 6V30W Halogen bulb P/N EL-455;
It is important to follow Safety Instructions carefully to avoid any kind
Fig. 1
SAFETY INFORMATION
2
2
MET 400
The following code categories describe the degree of danger or damage likely to be incurred in the event of
user error made in ignorance of these symbols.
Symbol
Explanation
Hot parts symbol.
This symbol is placed on bulb housing and on other parts to indicate that they
may be hot. Never touch those parts just after the equipment has been used.
Allow sufficient time to cool before touching them. In the event of user error,
it is possible to injury.
!
!
ATTENTION
In the event of user error, product may be damaged.
The following describes icon directives
This icon denotes “Refer to User Manual” and “Caution”.
This icon represents the productive earth.
This icon represents alternating current.
WARNING
In the event of user error, death or serious injury is possible.
Safety Symbols
This icon represents the power switch is turned OFF.
This icon represents the power switch is turned ON.
Labeling Infromation
SN
Number following this symbol indicate the serial number of the equipment.
REF
Character following the symbol indicate the catalog number of the equipment.
