9
eVO 300
SETUP (continued)
8126200-795
eVO 300
Issue 1.1
Printed on April,2016
UNPACKING AND INSTALLATION
1. Open the outside shipping box and remove the
three (3) inner boxes.
2. Remove the user’s guide and read it.
3. Open the box with the Table Top and Electronics
in it. Refer to Figure-1
4. Remove the Table Top from the box and install
the Table Top onto the instrument stand or
table, and secure it in. Place as indicated in the
user guide for the stand.
5. Open the box with the chin rest assembly and
remove it. Refer to Figure-2.
6. Using the 3mm Hex Wrench, connect the Ground
Wire from the Power Supply to the Chin Rest
Assembly using the Ground Screw provided
(torque to 7.8 N.m). Refer to Figure-3.
7. Using the 5mm Hex Wrench, remove the two
Screw from the button of the Table Top and
attach the Chin Rest Assembly to the Table Top
using these screws. Refer to Figure-4.
Figure-1 Table Top and Electronics
Figure-2 Chin Rest Assembly
Ground
Screw
Ground
Wire
Figure-3 Chin Rest Ground
Screw
Figure-4 Chin Rest Attaching Screw
