Instruction manual for CoolSafe
06012017QA01
Item No. 700749
CopyRight © 2017
Page
7
of
20
The Pro models display is the same with the exception that condenser pressure is displayed as
shown below.
4.2
Valves and connections
The CoolSafe is equipped with several valves and connections that makes the freeze-dryer function
and operate correctly. Each must be set correctly and plugged in correctly to make the CoolSafe
operational.
4.2.1
Power supply and ON/OFF switch
The CoolSafe is designed to be plugged into a standard wall socket with build in earth and minimum
10 A fuse.
The CoolSafe is delivered with a country specific power cable, which is connected to the unit on the
lower left hand side on the back panel. The main ON/OFF switch is placed on the front panel of the
unit. When switched on the switch is illuminated green.
4.2.2
Vacuum pump connection
The connection for the vacuum pump is placed on the back of the cabinet. The connection between
the vacuum pump and the freeze dryer is a vacuum hose, which is clamped to the nozzles on the
vacuum pump and the freeze dryer with the delivered clamps.
