Instruction Manual |
1
1.0 Introduction
Congratulations on purchasing your Labnet Orbit™ LS Low Speed Orbital Shaker. Large orbit and low
speed make the Orbit LS useful for staining and destaining gels, washing blots and general mixing.
The shaker is supplied with a 30 x 30 cm stainless steel flat platform and non-slip rubber mat to
keep plates, dishes and other sample containers in place. Safe for use in temperature controlled
environments, the small profile of this shaker makes it ideal for use in incubators such as the Labnet
311 and 611 series.
2.0 Packing
The Labnet Orbit LS Low Speed Orbital Shaker includes the following components:
Orbit LS Low Speed Orbital Shaker
Flat platform (30 x 30 cm)
Instruction Manual
3.0 Specifications
Speed
3 to 60 rpm
Shaker orbit
19 mm (3/4 inch)
Timer
20 to 120 min. in 10 min step, HOLD function
Maximum load
11 lbs. (5 kg)
Dimensions
10.3 x 13.3 x 5.5 in. (26.2 X 33.7 x 14 cm)
Platform dimensions (W x L)
11.6 x 11.6 in. (29.5 x 29.5 cm) useable area
Weight
14.5 lbs. (6.6 kg)
Fuse
2 x 0.5A 230V
2 x 1A 115V
Electrical
120V or 230V, 50/60Hz
230V includes EU and UK power cords
Operation conditions
4°C to 70°C, up to 85% RH, non-condensing
4.0 Safety Information
Do not use the shaker near water sources. Be sure that water doesn’t get on the device, especially
during the cleaning procedures.
Do not expose the shaker to aggressive vapors (e.g. organic solvents).
Do not insert objects into the shaker (such as screw driver or metal rods).
Never operate the shaker without platform securely attached.
Hazardous samples should be shaken only in appropriate containment vessels.
NOTE:
If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
Do not shake flammable or explosive samples.
