Labnet I-5222-D-230V, Руководство пользователя

Страница: 4 / 16

BENCHTOP SHAKING INCUBATOR 222DS USER'S MANUAL
Page 4
3.0 INSTALLATION
3.1 UNPACKING
Before starting the installation, carefully examine the delivery for possible damage or missing
parts:
-
Open the box and lift the device, together with the shock absorbers, out of the box.
- Remove the shock absorbers and check that the machine has not been visibly damaged
during the transportation. Keep the packing material until you are sure that the machine
functions properly.
- Check the information on the name plate on the rear side of the machine:
- Type
- Serial
number
- Article number
- Check that the mains cord has a pin configuration that fits into a wall socket according to
the local standard.
If any kind of damage occurred during transportation, immediately make a complaint to the
carrier. Any incorrect delivery or missing parts should be reported to the distributor.
3.2 SELECTING THE RIGHT PLACE
When selecting the right place for device, please consider the following:
-
Put the device on a smooth, horizontal and stable place.
- Leave enough space on the back side of the device for normal air circulation.
- Leave enough space around the device, that you will easy control and maintain it.
- Don’t use the device in surroundings, where there are fast temperature and humidity
changes. Please avoid also such places, which are under direct access of sunlight or
places nearby heat producing devices.
- Avoid such places, where the possibility of shocks and vibrations exists.
Do not use the device in inflammable or explosive atmosphere!
Note: The equipment shall be placed so that it is not difficult to pull out a cord plug
from mains receptacle.