Cleaning
• External parts may be cleaned with a swab moistened
with isopropyl alcohol.
• The nose piece and the pipet holder may be autoclaved
at 121°C for 20 minutes.
•
The filter included in the set may be sterilized by
autoclaving at 121°C for not more than 15 minutes.
• The outer body of the pipet controller is UV resistant,
the recommended distance from the radiation source
to exposed element should be not less than 50 cm.
Prolonged and very intense UV exposure can cause
de-coloration of pipet controller parts, without affecting
its performance.
Product Disposal
According to Directive 2012/19/EU of the
European Parliament and of the Council of
4 July 2012 on waste electrical and electronic
equipment (WEEE), the HTL Swiftpet Pro Pipet
Controller is marked with the crossed-out
wheeled bin and must not be disposed of
with domestic waste.
Consequently, the buyer shall follow the
instructions for reuse and recycling of waste
electronic and electrical equipment (WEEE)
provided with the products and available at
www.corning.com/weee
.
Warranty
The Labnet FastPette™ Pro and FastPette V2 pipet
controllers are covered by a 1 (one) year limited warranty.
For more information on the warranty limitations refer
to full version of the User Manual available at
www.labnetlink.com
.
