Labnet BioPette E BE1000-1 series, Руководство по эксплуатации

Страница: 26 / 39

3. Press «SET» to confirm the selection. The symbol will
then appear.
4. Use «Up/Down» to select the desired pipetting count.
5. Press «SET» to confirm the selection of count. The default
pipetting volume will start flashing.
6. Use «Up/Down» to select the desired pipetting volume.
7. Press «SET» to confirm the pipetting volume. The pipetting
volume will show the total aspirating volume.
8. After the settings are completed, first press the
PLUNGER
button to
aspirate the sample according to the pipetting volume. Then press the
PLUNGER
button repeatedly to dispense the samples according to the
pipetting counts. For the last count, you will hear two beeps to indicate
that the next dispense is the last. If using the recommended Reverse
Pipetting mode, the display will show to remind the user to
press the
PLUNGER
button and dispense the extra remaining amount of
liquid. After completing the Multiple Dispensing cycle, pressing the
PLUNGER
button again will aspirate liquid into the tip and repeat the set
MD cycle.
8. MIX Mode
21
1. Press «EXIT» to enter mode selection.
2. Press «Up/Down» repeatedly until the symbol starts
flashing.
After the settings are completed (see instructions below), Mixing is
performed automatically by pressing the
PLUNGER
button once.