5
IR Receiver and Blaster Connections
IR Cable Pin Assignment
4x IR Receiver Cables
To control the source AV device (Blu-ray player or DVD player, etc) from the display location using a remote control:
1. Plug each IR Receiver’s 3.5mm plug into the HDMI Receiver IR in port (RX 3). Then position each IR Receiver sensor
close to the connected display where it will be in line of sight of the remote control. After testing you can use the
adhesive pad to hold the sensor in position.
2. Plug the IR Transmitter’s 3.5mm plug into the HDMI Splitter/Transmitter IR out port (TX 5). Then position the IR
Blaster as close as possible to and facing the sensor of the AV source use the adhesive pad to hold the sensor
in position.
1x IR Blaster Cable
IR Receiver Sensor
IR Blaster
