LabelTac LT9, Справочное руководство

Страница: 14 / 32

12
Loading print ribbon
Using LabelTac
®
Loading print ribbon
Lift printer cover open. Push print head release lever to open
print head mechanism.
(a)
Insert the ribbon onto the ribbon supply spindle (rear), and the
blank cardboard core onto the ribbon rewind spindle (front).
(b)
There should be small cardboard spacers already on the
spindles that will align the rolls to the center of the printing path.
If these are not there, call us at 866-777-1360 for replacements.
Thread ribbon through the ribbon sensor slot and up and
over the print head.
(c)
Stick the ribbon onto the ribbon rewind
cardboard core with tape or a piece of LabelTac
®
supply, being
sure to keep the ribbon as flat and wrinkle-free as possible.
Wind the ribbon rewind spindle by hand ~3-5 turns until
ribbon is smooth, properly stretched and wrinkle-free.
Close the print head mechanism, making sure the latches are
engaged properly. Close printer cover.
1
2
3
4
5