LabelTac 6, Справочное руководство

Страница: 26 / 32

24 Using LabelTac
®
When using die-cut labels...
When using die-cut labels...
**
To switch back to using standard continuous vinyl, simply return to the ‘Printing
Preferences’ window and change the Media Type back to ‘Continuous’.
1 Load the die-cut material in the printer, leaving a small amount
of the first label leading out of the mouth of the printer.
2
When ready to print your label, first go to ‘Printing Preferences’
for your LabelTac
®
(see page 22) . In the tabs at the top of the
window, click ‘Stock’.
3 Under ‘Type’ in the ‘Media Settings’ section, change from
‘Continuous’ to ‘Labels with Gaps’. Click OK
4
Change the number of copies to print to ‘1’, (if it isn’t set to that
already) and click Print/OK to begin printing.
The printer will print this first label off-center, and the print will overlap
into part of the second label. This is normal. (The printer self-calibrates
itself by reading the gaps between the labels, and once it reaches the
end of the second label, it will be fully calibrated and aligned.)
5
Go back and print the rest of the labels as normal.