LM3510 Print & Apply Label Applicator
USER’S MANUAL
Page 31
Made in the U.S.A.
© 2019 LABELMILL
11/01/2019 Model LM3510
•
CYCLE TYPE
Cycle Type determines the application type and sequence in relation to the label feed.
PROGRAMMABLE BLOCKS:
No Tamp – Not normally used
Tamp Before Feed – (standard) Tamps label first, prints label second
Tamp After Feed – Prints label first, tamps label second
Blow Before Feed – Blows on label first, prints label second
Blow After Feed - Prints label first, Blows on label second
PrePrint Tamp – *see below*
PrePrint Blow – *see below*
Clamshell Before Feed – Clamshell applies label first, prints label second
Clamshell Before Feed – Prints label first, clamshell applies label second
Variable data - The
PREPRINT CYCLES
allows an optional (PRE-PRINT) product trigger to print the label, the
second (standard) trigger would activate the tamp cycle only. This is used primarily with variable data being
gathered for example when the applicator is being interfaced with a scale.
•
JOB STORAGE
Used to store frequently used settings pertaining to different labeling jobs.
PROGRAMMABLE BLOCKS:
SAVE JOB – stores settings for active job. (1 to 6 job positions)
RESTORE JOB – Restores saved job. (1 to 6 job positions)
Delete Job – Delete stored job
•
DEFAULTS
This setting will return the controller to the default settings.
•
I/O STATUS
Displays the status of the inputs and outputs.
•
NETWORK SETTINGS
Used to program IP settings (functional only if optional Ethernet Module is installed)
3-04
